The ITI 71 battery tensioner is built for woven and composite textile strap in widths from 16 mm to 40 mm. If you strap pallets, bundle products for retail or secure packages for shipping, you know that manual tensioning is slow and produces uneven results. This tool addresses that with adjustable tension up to 11,000 N and a tensioning speed of 6.5 metres per minute.
Why you need a battery tensioner for composite and woven strap
Manual tensioning of wide textile or composite strap is physically demanding. Operators tire quickly, and strap tightness varies from cycle to cycle. Loose straps allow loads to shift in transit, leading to damaged goods and rejected shipments. On high-volume lines, each strap applied by hand costs time that compounds across hundreds of pallets per shift.
Without battery strapping tools, you also risk under-tensioning heavy loads.

How the battery tensioner ITI 71 delivers up to 11,000 N of tension
The ITI 71 pulls strap at 6.5 metres per minute and applies adjustable tension up to 11,000 N through a regulator button located beneath the battery. An integrated cutting unit trims excess strap. The body is aluminium cast, and the tool weighs 5 kg with battery installed.
Key figures:
- Tension force: up to 11,000 N, adjustable via regulator
- Tensioning speed: 6.5 m/min
- Strap width: 16–40 mm
- Strap thickness: 0.5–1.5 mm
- Battery: 18 V Li-Ion, approx. 400 cycles per charge
- Recharge time: approx. 40 minutes
Two batteries are included, so one can charge whilst the other is in use. This keeps the pallet strapping tool running through longer shifts without downtime.

Where the ITI 71 battery tensioner fits your operation
This tool is designed for woven and composite textile strap only. It suits warehouse and production environments where pallets or bundles are secured with wide textile strap.
It does not seal the strap. You will need a separate sealing method, such as buckles or other fasteners, depending on your strap type. If your application uses steel or polypropylene strap, a different tool is required.
Typical applications:
- Pallet strapping with 16–40 mm woven and composite textile strap
- Bundling products for retail
- Securing packages for shipping
What to check before you order this battery tensioner
Confirm that your strap is textile (woven or composite), between 16 mm and 40 mm wide and between 0.5 mm and 1.5 mm thick. The ITI 71 battery tensioner does not work with steel or polypropylene strap. The tool tensions only; it does not seal. Ensure you have a compatible sealing method in place.
- Strap material: woven or composite textile only
- Strap width: 16–40 mm
- Strap thickness: 0.5–1.5 mm
- Battery: 18 V Li-Ion, two batteries and charger included
- Weight: 5 kg with battery
Check the specification table on this page for full dimensions and ratings.







