The NEO2 strapping tool is a battery-operated device that tensions, friction-welds and cuts PET or PP strap in two button presses. If you run a packing station, despatch area or production line, you know that uneven strap tension and slow manual sealing waste time and put goods at risk during transit.
What the NEO2 strapping tool does
The NEO2 tensions strap from 9 to 16 mm wide and 0.5 to 1.2 mm thick. Tension force is adjustable from 500 to 3200 N. The friction-weld seal reaches approximately 75 % of the strap’s own tensile strength, so metal buckles or seals are not required. You choose between semi-automatic and automatic mode: in semi-automatic, you press once to tension and again to weld and cut; in automatic, a single press runs the full cycle.
The tool weighs 2.8 kg without battery. It measures 315 × 140 × 120 mm. A brushless motor drives the mechanism, and the strap feed speed is 50 to 150 mm/s.

Why the NEO2 strapping tool replaces manual and pneumatic methods
Manual tensioning with a windlass or ratchet is slow and produces inconsistent joints. Pneumatic tools tie the operator to a hose and need compressor infrastructure. The NEO2 runs on a rechargeable 18 V lithium-ion battery, so there is no hose, no cable and no external power source at the point of use.
The kit includes one 18 V battery and a charger. Charging takes 45 to 60 minutes. If your shifts are long, a second battery keeps the line moving whilst the first charges.

Where the NEO2 strapping tool fits your operation
The NEO2 suits warehouse, production and despatch environments that use PET or PP strap from 9 to 16 mm. It operates in ambient temperatures from 5 °C to 45 °C. If your strap is wider than 16 mm or you need steel strapping, choose a model rated for those specifications.

What to verify before ordering
- Strap material and size: PET or PP, 9–16 mm wide, 0.5–1.2 mm thick.
- Battery: 18 V lithium-ion, one battery and charger included.
- Operating modes: semi-automatic and automatic.
- Tension range: 500–3200 N, adjustable.
Review the spec table on this page for full dimensions and ratings. Confirm your strap type and width before placing your order.
Specifications
| Parameter | Specification |
|---|---|
| Operating modes | Semi-automatic and automatic |
| Battery type | Lithium-ion, 5000mAh capacity |
| Battery cycles | Up to 600 per charge |
| Tension range | 500 to 3200N |
| Strap compatibility | PET and PP (9-16mm width, 0.5-1.2mm thickness) |
| Dimensions | 315mm x 140mm x 120mm |
| Weight | 2.8kg (tool only), 620g (battery) |
| Friction welding strength | Approx. 75% of strap strength |
| Charging time | 45-60 minutes |
| Motor type | Brushless motor |
| Display | Digital display for adjustments |
| Ambient temperature | 5°C to 45°C |










