Strap seals create the mechanical closure that holds tension at every joint in a strapping operation. If the seal does not match the strap material and width, the joint fails and loads shift during transit. Here you find galvanised metal seals for PP strap, high-strength steel clips for manual and pneumatic steel strapping, and wire buckles for composite and textile strap, covering widths from 13 mm to 32 mm.
Showing all 4 results
-
Brand newVariation SKUs: 660320, 660324, 660326, 660328
Cord Strap Buckles, Galvanised Wire, 16 mm to 32 mm Width
Price range: €39 through €57.68 This product has multiple variants. The options may be chosen on the product page Request a quoteAdd to quote -
Brand newVariation SKUs: 660395, 660400, 660410, 660420
Steel Strapping Seals 16-32 mm for Pneumatic Tools, Carbon Steel
Price range: €79 through €109 This product has multiple variants. The options may be chosen on the product page Request a quoteAdd to quote -
Brand newVariation SKUs: 660300, 660311
Plastic Strapping Clips for PP Strap 13 mm and 16 mm, 1000 pcs
€15 This product has multiple variants. The options may be chosen on the product page Request a quoteAdd to quote -
Brand newSKU: 660390
Metal Strapping Seals 16×40 mm for 16 mm Steel Strap, 1000 Pieces
€79Get a quote or buy Request a quoteAdd to quote
Strap Seals
Strap seals: why the joint closure determines load security
A strap under tension only holds a load if its two ends remain locked together. The closure at the joint carries the full pull of the strap. When a seal is the wrong size or the wrong type, the ends slip free and the load shifts in transit. Warehouse managers, production staff and shipping teams depend on having the correct strap seals on hand before work begins.
Four products for three strap materials
This category contains four products. Each one is made for a specific strap material, width range and application method.
- Metal seals for PP strap. PP strap clips (13 and 16 mm) are galvanised steel closures for polypropylene strap. Supplied in boxes of 1000 pieces, they suit manual or tool-assisted application. Suitable for logistics, warehousing, manufacturing and shipping.
- Steel clips for manual application. Banding clips 16×40 mm are high-strength steel closures for 16 mm steel strap. Packed 1000 to a box, they work with standard manual tensioners and sealers without any power source. Used in warehousing, production and construction.
- Steel clips for pneumatic application. Pallet banding clips (16–32 mm) are made from high-strength carbon steel for use with pneumatic tensioners and sealers. They cover steel strap widths of 16, 19, 25 and 32 mm. The joint is formed mechanically with no heat or welding.
- Wire buckles for cord strap. Wire buckles (16–32 mm) are galvanised and suit textile and composite strapping in 16 mm, 19 mm, 25 mm and 32 mm widths. Wire diameter is 3.5 mm for 16 mm strap, 4 mm for 19 mm strap and 5 mm for 25 mm strap. Boxes contain 1000 pieces for 16 mm and 19 mm widths, and 500 pieces for 25 mm.
Plastic Strapping Clips for PP Strap 13 mm and 16 mm, 1000 pcs€15
Metal Strapping Seals 16×40 mm for 16 mm Steel Strap, 1000 Pieces€79
Steel Strapping Seals 16-32 mm for Pneumatic Tools, Carbon Steel Price range: €79 through €109
Cord Strap Buckles, Galvanised Wire, 16 mm to 32 mm Width Price range: €39 through €57.68How to select the right seal or clip
Three factors determine which product you need.
- Strap material. PP strap takes a metal seal. Steel strap takes a banding clip. Textile or composite cord strap takes a wire buckle. One type cannot substitute for another.
- Strap width. The seal or clip must match the strap width exactly. A closure that is too wide will not grip the strap. One that is too narrow will not close around it.
- Tool type. Steel strap users must distinguish between manual and pneumatic sealers. The 16×40 mm manual clip and the pneumatic range are not interchangeable. For PP strap, the seal is applied by hand or with a manual tool. Wire buckles are for textile and composite strap.
When strap seals are not required
Battery and pneumatic tools for PET and PP strap create the joint by friction welding. These tools need no separate closure. If you use a friction-weld tool, you only need the strap coil itself. Strap seals apply only where the joint is formed by mechanical locking under tension. Browse our battery strapping tools for friction-weld models that need no separate closure.
Planning your consumption
Every joint consumes one seal, clip or buckle. Four straps on a pallet means four closures used. Count your daily strapping volume and keep enough boxes on the shelf so production does not stop mid-shift. Always order closures in the same width as your strap coils to prevent a mismatch on the line. For a ready-to-use set of tool, strap and closures, see our pallet strapping kits. Keep strap coils and closures together at the work station with a banding cart.
Questions about strap seals
Can I use the same seal for PP strap and steel strap?
No. Metal seals are for PP strap, banding clips are for steel strap and wire buckles are for composite or textile strap. Each type fits one strap material and cannot substitute for another.
How many pieces come in one box?
PP metal seals and banding clips are packed 1000 to a box. Wire buckles come 1000 per box for 16 mm and 19 mm widths, and 500 per box for 25 mm widths.
Do I need seals or clips with a friction-weld tool?
No. Battery and pneumatic tools for PET and PP strap create the joint by friction welding, so no separate closure is required. Seals and clips are only needed where the joint is formed by mechanical locking.
Which wire diameter matches my cord strap width?
For 16 mm cord strap the wire diameter is 3.5 mm, for 19 mm it is 4 mm and for 25 mm it is 5 mm.