The NEO Plus strapping tool is a battery-powered hand tool that tensions, friction-welds and cuts PP and PET strap in widths from 16 to 19 mm. If your team straps pallets or large loads by hand using metal buckles, every cycle costs extra time and material. This tool removes the buckle, automates the seal and lets a single operator work cordlessly at the packing point.
Problems the NEO Plus strapping tool addresses
Manual strap tensioning depends on operator strength. Tension varies from one strap to the next: too loose and the load shifts in transit, too tight and the goods can be damaged. Each buckle adds a material cost that multiplies across hundreds of straps per day.
Heavier tools cause arm fatigue after repeated cycles. Pneumatic and mains-powered alternatives restrict movement with hoses and cables, tying the operator to a fixed station. All of this slows packing and raises running costs.

How this NEO Plus strapping tool works and what it changes
The operator places the strap around the load and feeds it into the tool. Pressing and holding the orange button for 3 seconds starts the machine. The tensioning mechanism pulls the strap to the force you set, anywhere from 600 to 4,000 N.
Once target tension is reached, friction welding seals the overlapping ends with heat and pressure. A built-in blade then cuts the excess strap automatically. The complete cycle requires no metal buckle.
The NEO Plus strapping tool weighs 3.8 kg including battery and can be operated with one hand. Adjustable strap guides let you switch between 16 and 19 mm widths. A digital display reports the operating mode, tension force, welding time, strap width setting, battery level and any anomaly warnings.
Each battery charge supports 400 to 500 strapping cycles, depending on the strap type and the tension force applied.

Where this NEO Plus strapping tool fits and where it does not
This tool is designed for PP and PET strap only. Supported widths are 16 to 19 mm.
It suits packing stations where pallets and large loads need cordless strapping. The tool works normally in dusty conditions. It is not suitable for steel strap or for widths outside the range listed above. If you need strap narrower than 16 mm, a different tool is required.
NEO Plus strapping tool: what to check before ordering
Confirm the following before you place your order:
- Strap material: PP or PET only
- Strap width: 16 to 19 mm
- Power: 14.4 V / 4.0 Ah Li-Ion battery
- Charger input: 100/220 V
- Included: 2 batteries and 1 charger
Two batteries ship with the tool, so one can charge whilst the other is in use. Review the specification table on this page for full dimensions and ratings.





