The AIR Metal pneumatic steel strapping tool with seal joint combines tensioning, sealing and cutting of steel strap in a single device. On a busy packing line, switching between a separate tensioner and sealer for every joint costs time and introduces variation. This tool does all three with one lever: it tensions the strap to the set force, seals the joint and cuts the strap.
Why a pneumatic steel strapping tool saves time on every joint
With separate hand tools, the operator tensions the strap, puts the tensioner down, picks up the sealer and crimps. Each joint needs two tool changes, two positioning steps and two trigger actions. The AIR Metal does all of it in one cycle. Over a full shift, that removes the tool changes from every joint and shortens packing time.
Because tension is applied pneumatically, every joint gets the same force regardless of operator fatigue. Manual tensioners rely on grip strength; by the end of a shift, joints tend to loosen. Consistent tension means consistent load security.

How the steel strapping tool with seal joint works
Connect the tool to a standard compressed air supply. Wrap steel strap around the load, overlap the ends and place the tool over the joint. One lever runs through these stages:
- Tensioning cylinder pulls the free end to the preset force at 5.3 m/min
- The joint is sealed
- The strap is cut
- Tool releases the finished joint
Tension and sealing time are adjustable, so you can set the cycle to suit different strap dimensions and package shapes. The tool can be suspended and operated with one hand.

Where this metal banding tool fits and where it does not
This tool is built for steel strapping on medium to heavy loads. The 16–19 mm variant is for narrower steel strap; the 32 mm variant handles wider strap, with a clip endurance of up to 13 kN. Common applications:
- Palletised goods in warehouses and distribution centres
- Steel products, timber, brick and fibre
- Other heavy or unstable items
Industries that commonly use steel strapping tools like this include paper, aluminium, steel, wood and wooden packaging, chemical fibre, cotton, tobacco, chemicals and metals.
It requires compressed air at the strapping station. It does not accept polyester or polypropylene strap. If compressed air is unavailable, consider a battery-powered strapping tool instead.

What to verify before ordering the pneumatic steel strapping tool
Check the following before you order:
- Your steel strap width matches the 16–19 mm or the 32 mm variant
- Compressed air is available at every strapping station
- Your loads suit steel strapping (weight, handling, transport conditions)
- You do not need to strap with polyester or polypropylene
The tool is delivered without strap. You need steel strap in the width of your variant, steel clips for sealing and compressed air. Wear parts are few, and replacing the freewheel on this metal banding tool takes only minutes.
Specifications
| Parameter | Specification |
|---|---|
| Apply straps | Steel strip |
| Air pressure | 0.35-0.6Mpa |
| Straps specification | (19-32)×(0.8-1.2) mm |
| Steel strip tension speed | 5.3 m/min |
| Tension force | ≥9.8 KN/0.6Mpa |
| Machine weight | 15 kg |
Technical datasheet
Free download, no account needed.






