The ARGON 15.5 mm strapping kit gives you a battery strapping tool, a battery, a charger, a coil of 15.5 mm strap and a dispenser cart, ready to work from the box. If you strap pallets, boxes or bundles with PET or PP strap and want to stop handling metal seals, this kit does that in one delivery.
What this ARGON 15.5 mm strapping kit solves in daily work
Manual strapping with metal seals adds a consumable cost and an extra step to every strap cycle. The seal is a weak point: if it slips, the load shifts. Pneumatic tools remove some labour but tie you to a compressor. When the strap coil sits on the ground, it tangles, twists and slows the operator down.

How the ARGON tool and dispenser cart work
The ARGON handles PET strap from 10 to 16 mm wide (0.4–0.8 mm thick) and PP strap (0.5–0.8 mm thick) in the same width range. Tension force is adjustable and the tool seals the joint with a friction weld, then cuts the strap automatically. Tensioning speed reaches 11 m/min. The tool weighs 4 kg and runs on an 18 V Li-ion battery, delivering approximately 700 straps per charge. Charging time is 90 minutes.
The dispenser cart holds PET or PP strap from 10 to 19 mm wide on a 405/406 mm core. It feeds the strap without twisting and includes a tool box (370 × 200 × 100 mm). Cart dimensions: 400 × 550 × 1 050 mm, weight 17 kg.
Where the ARGON 15.5 mm strapping kit fits and where it does not
The kit suits warehouses, production lines and distribution centres where pallets, boxes and bundles are strapped with medium-width PET or PP strap. The 4 kg tool weight and 700 straps per charge make it manageable across a full shift.
Limits to note: the tool does not handle strap wider than 16 mm or steel strap. For heavier loads requiring wider strap, consider a kit with a higher tension rating.
What to check before you order your ARGON 15.5 mm strapping kit
Two strap variants are available:
- PET 15.5 × 0.7 mm / 1 750 m
- PP 15.5 × 0.63 mm / 2 000 m
Both coils sit on a 406 mm core. Every variant ships with the ARGON tool, one 18 V Li-ion battery, a charger, the strap coil and the dispenser cart with tool box. If you need additional coils or a different strap width within the 10–16 mm range, contact us before ordering.





