The NEO2 PET strapping kit pairs the NEO2 battery strapping tool with a PET strap coil and a wheeled dispensing cart, shipped as one ready-to-use package. Many operations still rely on manual tensioners with metal seals or pneumatic tools connected to fixed air lines. Both approaches limit where you can strap and add time to every cycle.
What the NEO2 PET strapping kit replaces in your workflow
Manual strapping with a tensioner and separate seals demands multiple hand movements per strap. Each cycle takes longer, and inconsistent tension leads to loose loads that shift during transport. Pneumatic tools speed things up, but they tie you to a compressor and hose runs that cannot reach every corner of the warehouse.
Common consequences:
- Rework caused by uneven strap tension and seal failures
- Operator fatigue from repetitive manual tensioning
- Ongoing cost of metal seals and compressed-air maintenance
- Pallet movement to fixed strapping stations instead of strapping at the staging point

How the NEO2 PET strapping kit solves these problems
The NEO2 tool tensions, seals and cuts the strap in a single automated cycle. Electronic tension control lets you set a force anywhere between 500 N and 3200 N. The tool then friction-welds the overlapping strap ends, so no metal seals are needed.
Key figures:
- Strap width: 9 mm to 16 mm
- Strap thickness: 0.5 mm to 1.2 mm
- Tool weight: 2.8 kg (tool body); battery approximately 620 g
- 14.4 V lithium-ion battery, up to 600 cycles per charge
- Charge time: approximately 45 to 60 minutes
The dispensing cart has a load capacity of up to 50 kg and fits standard 405/406 mm reels. It stores the tool, battery and charger in one mobile station measuring 550 × 400 × 1050 mm (cart weight 17 kg). You wheel the complete PET strapping kit to the load instead of routing pallets to a fixed point.

Where this strapping kit fits and where it does not
The NEO2 tool handles PET and PP straps from 9 mm to 16 mm wide and 0.5 mm to 1.2 mm thick. This PET strapping kit suits pallet securing, carton bundling and load stabilisation in warehouses, logistics centres, production halls and export packaging areas. Battery power removes the need for compressed-air infrastructure, making the kit practical for temporary stations or sites without pneumatics.
The tool is not built for steel strap. If your loads call for widths above 16 mm or below 9 mm, or thicknesses outside the supported range, you need a different tool.

What to check before you order your NEO2 PET strapping kit
Three strap variants are available:
- 15.5 × 0.9 mm on a 406 mm reel, 1250 m
- 15.5 × 0.7 mm on a 406 mm reel, 1750 m
- 12 × 0.6 mm on a 406 mm reel, 2500 m
Pick the dimension that matches your load weight and pallet size.
Each kit ships with the NEO2 tool, one lithium-ion battery, a charger, one PET strap coil in your chosen variant and the mobile dispensing cart. No extra purchases are needed to begin strapping on the day you receive it.





