The GT ONE strapping tool is a handheld, battery-operated device for tensioning, sealing and cutting PET or PP strap between 10 and 16 mm wide and 0.5 to 1.1 mm thick. If your team currently straps loads by hand, each cycle involves pulling the strap tight with a tensioner, crimping a metal seal and trimming the excess. That process is slow, produces variable tension from strap to strap and adds the recurring cost of metal seals. A single tool that performs all three steps under controlled force changes the way you secure loads.
What the GT ONE strapping tool replaces in your workflow
Hand tensioning gives a different pull force every time. One strap may be too slack while the next is too tight, and neither result keeps goods stable in transit. Metal seals are a per-strap consumable: every pallet adds another clip to your purchasing list. Pneumatic alternatives remove some of the manual effort but tie you to a compressor and hose, limiting where you can move around the load. The GT ONE eliminates metal seals entirely by creating a friction weld joint that bonds the strap overlap through vibration-generated heat.

How the GT ONE works: tension, seal and cut
You wrap PET or PP strap around the load and feed both ends into the tool. In automatic mode, pressing a single button runs the full sequence: the device tensions the strap to your preset force, friction-welds the joint and cuts the tail. Semi-automatic and manual modes are also available when you need direct control over individual steps. A soft mode at 500 N lets you strap fragile items without crushing them.
- Maximum tension: up to 2750 N
- Seal type: high-grade friction weld (vibration welding)
- Modes: automatic, semi-automatic, manual
- Weight: 3.7 kg including battery
- Dimensions: 320 × 100 × 160 mm
- Digital display for monitoring parameters during use
The GT ONE is equipped with a Bosch brushless motor. You can operate the tool one-handed in both vertical and horizontal orientations.

Where this strapping tool fits and where it does not
The GT ONE accepts PET and PP strap in widths from 10 to 16 mm and thicknesses from 0.5 to 1.1 mm. No other strap material or size is compatible. The tool is used across industries and warehouse environments for pallet and bundle strapping. Being cordless, it moves with you around the load without air hoses or trailing cables.
If your application requires steel strap or widths outside the 10–16 mm range, you need a different tool.

What to check before you order your GT ONE strapping tool
Confirm the following before placing your order:
- Strap material: PET or PP
- Strap width: 10–16 mm
- Strap thickness: 0.5–1.1 mm
- Charger input: 220 V
Each unit ships with the tool, one 14.4 V Li-Ion battery and one 220 V charger. No metal seals are needed because the tool creates friction weld joints. Verify your strap material and dimensions before ordering.





