The AKU-STEEL DUO battery-powered strapping tool and tensioner is a two-unit set comprising a battery-powered sealer and tensioner for steel strap in widths of 19, 25 or 32 mm. If your operation secures heavy loads with steel band, you deal with manual ratchets that exhaust operators, compressed-air tools that limit movement, or both. This set replaces those methods with a cordless solution that delivers at least 6 kN of tensioning force and at least 16.8 kN of sealing force.
Why a battery-powered strapping tool and tensioner replaces manual and pneumatic methods
Manual steel strapping creates several problems that compound across a shift:
- Inconsistent strap tension, raising the risk of load shift or damaged goods in transit
- Operator fatigue and strain injuries from repetitive manual force
- Limited mobility when an air hose defines your working radius
- Longer cycle times per strap, slowing despatch schedules
Battery strapping tools remove the air line and the physical strain. The AKU-STEEL DUO runs on 18 V batteries and operates wherever the load is, with no compressor to maintain.

How the AKU-STEEL DUO tensions and seals steel strap
The set consists of a sealer and a tensioner, each with its own 18 V battery. The tensioner pulls steel strap and delivers at least 6 kN of force. The sealer applies at least 16.8 kN to crimp a steel buckle onto the overlapping strap ends.
Built-in safeguards include:
- Protective housing shields internal components from damage
- Anti-slip handles provide a firm grip in challenging working environments
- Overload protection guards against excessive current or voltage
- Thermal management prevents overheating during continuous operation
The sealer completes at least 1,200 cycles per charge. The tensioner completes at least 220 cycles. Charging takes 50–60 minutes per battery.

Where these battery strapping tools fit your operation
This set is made for steel strap 0.8–1.2 mm thick in widths of 19, 25 or 32 mm. It suits warehouse loading docks, production floors and outdoor yards where heavy or irregularly shaped loads require steel banding. The sealer weighs 3.9 kg and the tensioner 4.8 kg.
It is not suitable for plastic or textile strap. If your strap falls outside the width or thickness range listed above, a different model applies.

What to check before ordering the AKU-STEEL DUO battery-powered strapping tool
- Strap material and size: steel strap only, 0.8–1.2 mm thick. Select the variant matching your strap width: 19 mm, 25 mm or 32 mm.
- Power: 18 V battery; charger accepts 110/220 V AC.
- Cycles per charge: the sealer completes at least 1,200 cycles, the tensioner at least 220.
- Sealing method: the tool uses steel seals (buckles) to lock the strap in place.
- Set contents: the product is a set of two units, sealer and tensioner.
Review the specification table on this page for full dimensions and ratings.






