Cordless strappers give your team a portable, cable-free way to tension, seal and cut PET, PP, steel or textile strap. No compressor, no mains lead. The tools in this category cover strap widths from 9 to 40 mm and tension forces from 60 N to 11,000 N, with friction-weld or double-notch sealing depending on the strap material.

Showing all 18 results

Cordless Strappers

Cordless strappers: who needs them and why

Warehouse and production crews who strap pallets, parcels and bundles face two recurring problems. Compressed-air tools need a hose connected to a compressor; the hose restricts movement and the compressor consumes energy. Manual tensioners rely on lever force, which varies from one operator to the next. Tension becomes inconsistent, and load stability suffers.

A cordless strapper replaces both approaches. A lithium-ion cell drives the motor. You wrap the strap around the load, place both ends in the tool and start the cycle. The tool tensions, seals and cuts the strap. Models in this category offer automatic, semi-automatic and manual modes. No buckles or metal seals are needed on plastic strap because the joint is a friction weld.

Types of cordless strappers by strap material

PET and PP strap (9–25 mm)

Most cordless strappers in this category handle PET and PP strap. They split into three width bands:

  • 9–16 mm: the SIAT VIPER provides three operating modes (automatic, semi-automatic, manual) with a standard tension force of 1,200–2,700 N and weighs 3.9 kg with battery. The NEO2 weighs 2.8 kg without battery and adjusts from 500 to 3,200 N.
  • 13–19 mm: the ARGON PLUS covers this range with up to 4,200 N of tension and up to 500 straps per charge across automatic, semi-automatic and manual modes.
  • 19–25 mm: the TES EXTREME handles the widest PET/PP strap in the range with adjustable tension from 400 to 5,000 N. It weighs 4.32 kg with battery and seals by friction weld with an adhesion strength of up to 75%.

All PET/PP tools seal by friction weld. No metal clips or buckles are consumed per strap.

Steel strap (19–32 mm)

The ELECTRA M Series is a tensioner and separate double-notch sealer for 19, 25 or 32 mm steel strap, 0.60 to 1 mm thick. It delivers up to 7,500 N of tension at 3 metres per minute and runs on a Makita 18 V / 3 Ah Li-Ion battery that charges in 20 minutes.

€4,890View product →

Textile and composite strap (16–40 mm)

The ITI 71 is a dedicated tensioner for textile and composite strap. It reaches 11,000 N and ships with two 18 V batteries and a charger. This tool tensions only; sealing is not applicable.

Original price was: €2,600.Current price is: €2,439.View product →

Choosing the right cordless strapper

Four criteria narrow the decision:

  • Strap material and width. Each tool covers a fixed width range. Match it to the strap you already use. PET and PP suit most pallet loads.
  • Tension force. Heavy, tall or unstable pallets demand higher tension. The TES EXTREME reaches 5,000 N; for lighter parcels a model at 1,800 N, such as the GT SMART Plus for 9–16 mm strap, may suffice.
  • Automatic vs semi-automatic. Automatic models tension, seal and cut the strap in one cycle. Semi-automatic and manual modes give you control over individual steps. High throughput favours automatic.
  • Battery life and kit contents. Some tools ship with two batteries and a charger, so one charges whilst the other runs. Cycle counts per charge differ by model, from around 250 to 700 depending on battery capacity.

What else you need

A cordless strapper does not work on its own. You will also need:

  • Strap on a coil (PP, PET, steel or textile) in the width and thickness your tool accepts.
  • Strapping seals if you use steel strap with a double-notch sealer.
  • A strapping dispenser to hold the coil and feed strap to the operator.
  • Spare batteries for uninterrupted shifts. The GT ONE spare battery (14.4 V, 4.0 Ah Li-Ion) fits the GT ONE 10–16 mm tool.

Browse the products below and select by strap type, width and the tension force your loads require.

Questions about cordless strappers

Are metal seals needed?

PET and PP models seal by friction weld, so no metal seals or buckles are consumed per strap. Steel strap tools use a double-notch seal and require seals matched to the strap width.

How many straps per battery charge?

It varies by model, battery capacity and the tension applied. The SIAT VIPER reaches 250 to 350 cycles on a 3 Ah cell and 400 to 550 on a 5 Ah cell. The NEO2 delivers up to 600 cycles per charge. Models shipped with two batteries let one charge whilst the other runs.

Which models handle steel strap and which handle textile or composite strap?

The ELECTRA M Series and the AKU-STEEL DUO both accept steel strap from 19 to 32 mm. The ELECTRA M Series uses a double-notch seal and delivers up to 7,500 N. For textile and composite strap from 16 to 40 mm, the ITI 71 is the dedicated tensioner with up to 11,000 N of force; sealing is not applicable on this tool.

What strap widths are covered?

The tools in this category accept strap from 9 mm (PET/PP) to 40 mm (textile and composite). Each model covers a fixed width range, so match it to the strap you already use.