ARGON strapping tool: battery-powered strapping for PP and PET loads
The ARGON strapping tool is a battery-powered unit that tensions, welds and cuts PP or PET strap in widths from 10 to 16 mm. If you strap pallets, parcels, bricks, wood, steel profiles or fibre bundles by hand, you already know the problems: each strap takes too long, the tension varies from operator to operator, and metal buckles add material cost. This tool replaces that process with friction welding and adjustable tension controlled through a digital display.

What goes wrong without battery-powered strapping
Manual strapping is slow and inconsistent. Operators set different tensions, which means some loads arrive with shifted or damaged goods and others have over-tensioned strap that cuts into the product. Metal seals add a per-strap cost and a secondary waste stream. On high-volume lines, the physical effort of repeated hand tensioning causes fatigue, slows output across a shift, and increases the risk of repetitive strain. Air-hose or mains-cable tools restrict movement around the pallet and between stations.

How this ARGON strapping tool works
The tool accepts PP or PET strap 10–16 mm wide. It uses friction welding, so no metal seals are required. A tensioning speed of 11 m/min keeps cycle times short. The weld itself takes 1.1–1.4 s, followed by an adjustable cooling time of 2.5 s.
Three operating modes give you control over each step:
- Automatic: a short press of the tension button runs tensioning, welding and cutting in sequence.
- Semi-automatic: hold the tension button until the set value is reached; welding and cutting then run automatically.
- Manual: hold the tension button, then press the welding button separately; cut the strap by hand.
Gear selection lets you match the tool to the strap material. Gears 1–3 are for PP strap, gears 4–9 for PET. The button-and-display control shows the selected settings and signals when the weld cycle is complete.

Where this strapping tool fits and where it does not
The ARGON is suited to securing parcels, pallets, steel, wood, bricks and fibre bundles with PET or PP strap. It can strap both vertically and horizontally. It weighs 4.0 kg and measures 330 × 150 × 140 mm, so it can be operated with one hand.
It is not designed for:
- Steel strapping or strap widths outside 10–16 mm.
- Applications that need a tension force above what this tool provides.

What to check before you order this ARGON strapping tool
Confirm your strap matches the tool before ordering:
- Strap material: PP or PET only.
- Strap width: 10–16 mm.
- Battery: 18 V lithium, 0.6 kg; charges in 90 minutes on a 110/220 V charger; up to 700 straps per charge.
- Included: strapping tool, battery and charger in a carry case (440 × 280 × 180 mm packing dimensions).
The tool works in dusty environments and conditions with fine fibres, thanks to a dustproof filter screen. A low-power alarm warns when the battery needs recharging, and a signal sounds when each weld cycle is complete.






