The battery operated strapping machine TES EXTREME takes PET or PP strap from 19 to 25 mm wide and handles tensioning and sealing for you. Anyone who secures pallets, bundles or heavy goods by hand knows how long each strap takes and how much the pull differs between operators. This cordless unit, powered by a 14.8 V lithium-ion battery, takes that effort over for warehouse, production and despatch teams.
Why a battery operated strapping machine replaces manual tensioning
With a windlass or ratchet, every strap is slow to apply and the pull changes from one person to the next. Some loads leave the dock slack, others arrive with crushed corners because the strap was drawn too hard. Operators who strap dozens of loads in a shift also build up wrist and shoulder strain, and steel strap adds sharp edges and a recoil risk at the cut. A cordless machine removes the effort and applies one chosen tension to every joint.

How the TES EXTREME tensions and seals your strap
You pass PET or PP strap around the load and push the overlapping ends into the tool. It draws the strap at up to 180 mm/sec to a force you set between 400 and 5000 N, then stops pulling. A friction weld closes the overlap with up to 75 % adhesion strength, depending on strap quality, and the tail is cut automatically.
Key specifications:
- Width of strap: 19–25 mm
- Thickness of strap: 0.8–1.2 mm
- Adjustable tension: 400–5000 N
- Pulling speed: up to 180 mm/sec
- Seal: friction weld, up to 75 % adhesion strength
The kit holds two 14.8 V, 4.0 Ah lithium-ion batteries and one charger (input 100–240 VAC, 50/60 Hz). Each battery needs 90 minutes to charge, so you can work with one while the other recharges. With a battery fitted the machine weighs 4.32 kg and measures 350 mm × 135 mm × 170 mm.

Where this battery operated strapping machine fits your operation
The TES EXTREME is meant for PET and PP strap only. It suits packing lines, loading docks, production floors and agricultural packing stations where pallets or bundles need the same strap tension every time, without compressed air.
Steel strap, strap thinner than 0.8 mm or thicker than 1.2 mm, and widths outside 19–25 mm need a different model. A fully automated in-line system is also beyond what this handheld tool does.

What to check before ordering
- Strap: PET or PP only, 19–25 mm wide, 0.8–1.2 mm thick.
- Battery: 14.8 V, 4.0 Ah lithium-ion; two supplied.
- Charger: one supplied, input 100–240 VAC, 50/60 Hz.
- Weight with battery: 4.32 kg.
- Package: 440 mm × 280 mm × 185 mm, gross weight 7 kg.
The package holds the tool, two batteries and one charger. Order PET or PP strap of the matching width and thickness separately.








