The cordless PP strapping kit NEO2 is a single-order package that puts a cordless strapping tool, one battery, a charger, a coil of PP strap and a mobile cart on your floor the day it arrives. If you are still carrying strap coils by hand, dragging air hoses across the warehouse or sending pallets to a fixed strapping machine, this kit removes those steps and lets you strap at the pallet itself.
Problems this pallet strapping kit eliminates
Manual tensioning tools depend entirely on the operator. One person pulls the strap tight, the next leaves it loose, and corner damage or shifting loads follow. Air-powered tools tie you to a compressor and a hose run, which means the pallet has to be near the line or the hose has to reach the pallet. Both cost time.
- Inconsistent tension from hand tools causes load movement in transit
- Compressed-air hoses restrict where you can strap and create trip hazards
- Carrying a loose strap coil across a dispatch zone slows every cycle
- Operator fatigue rises when the tool or the strap has to be fetched between pallets

How the cordless PP strapping kit NEO2 works
Place the coil on the cart, lead the strap out over the guide, run it around the load and feed both layers into the tool. Press the button. The tool tensions the strap to your set force, friction-welds the two layers together and cuts the loose end in one automatic cycle. Tension is electronically controlled: you dial it to the load, so a carton of light goods does not get the same force as a heavy pallet of tiles.
The friction weld rubs the overlapping strap layers against each other until they fuse. No metal seals or buckles are needed. Weld time is adjustable; start at a mid-range setting and test every joint by pulling it apart by hand. Too short a weld peels open, too long a weld thins the strap.

Where this banding kit fits and where it does not
The kit suits warehouses, production facilities, dispatch zones and logistics hubs where palletised goods, cartons or bundled items are strapped at multiple points. Retail logistics, food and beverage distribution, industrial manufacturing and contract packaging are typical applications.
- Handles PP and PET strap from 9 to 16 mm wide
- Works without compressed air or mains power at the strapping point
- Cart rolls to each pallet, so fixed stations are not required
For loads that are hot or have sharp edges, a steel strap and a steel-strapping tool are the right choice. For continuous high-volume lines, a semi-automatic or automatic machine will be faster than any hand-held tool.

What to check before you order this pallet strapping kit
This kit ships with PP strap. Two coil variants are available: 12 mm × 0.8 mm (2000 m on a 406 mm core) and 15 mm × 0.8 mm (1800 m on a 406 mm core). Choose the width that matches your current strap specification. The tool itself accepts any PP or PET strap from 9 to 16 mm.
- One battery and one charger are included; a second battery keeps the tool running through a longer shift
- No metal seals are needed; the friction-weld joint is seal-free
- Corner protectors are recommended for soft goods, because the strap can cut into the top edge under tension
- Keep the welding plate and gripper free of dust and strap chips; contamination is the main cause of weak joints









