The TES Plus strapping tool is built for warehouse and production teams that secure heavy loads with PET or PP strap. When pallets, bundles or large packages leave your facility, consistent strap tension and a strong joint determine whether goods arrive intact.
Problems the TES Plus strapping tool eliminates
Manual tensioning depends on the operator’s strength. Joint quality varies from one strap to the next, and the work is physically demanding over a full day. Pneumatic tools deliver more force but tie you to a compressor and a hose, limiting your reach across the floor.
A tool with only one battery can run flat during a shift, leaving the operator idle while it recharges. Loose or uneven strap lets goods move in transit, causing crushed corners, torn wrapping and claims from your customer.

How the TES Plus strapping tool works
You set the desired tension by turning a dial. The adjustable force range is 60 to 4000 N. A thumb press on the start button triggers tensioning, friction welding and cutting in sequence. Sealing time is also adjustable, so you can match the setting to your strap material and thickness.
The friction weld joint reaches up to 75 % average seal strength. No separate fasteners are required. The tool accepts PET and PP strap in widths of 16 to 19 mm and thicknesses of 0.5 to 1.2 mm.
- Tension force: 60–4000 N
- Seal type: high-grade friction weld
- Strap width: 16–19 mm
- Strap thickness: 0.5–1.2 mm
- Tool weight: 4.3 kg
- Dimensions: 350 × 135 × 170 mm
Two batteries ship with the tool. While one powers the tool, the other charges in approximately 90 minutes. Each battery delivers 150 to 220 seals per charge.

Where this strapping tool fits and where it does not
The TES Plus is used in paper, aluminium, textile, steel, logistics, farm, chemical and metal industries. At 4.3 kg, this strapping tool is designed for one-hand use and works in both vertical and horizontal positions.
This model is not suitable for:
- Steel strap
- Strap widths outside 16–19 mm
- Strap thicknesses outside 0.5–1.2 mm
If your application requires a different strap material or width, choose another model matched to those specifications.

What to check before you order your TES Plus strapping tool
Confirm your strap is PET or PP, 16 to 19 mm wide and 0.5 to 1.2 mm thick. The charger accepts 110–240 V, 50–60 Hz input, so verify your supply matches. This strapping tool ships with a charger and two batteries. The friction weld process means no separate seals or buckles are needed.





