The ITI 71 cord strapping kit gives you a battery tensioner, batteries, a charger and a dispenser cart for cord (composite) strap, ready to work from the first box. Cord strap in widths from 16 to 40 mm is used on steel, timber and heavy industrial goods where high tension and load stability matter.
What this ITI 71 cord strapping kit contains
The kit ships with the ITI 71 battery tensioner, two 18 V / 5 Ah Li-ion batteries, one charger, one coil of cord strap in the width you select, a box of wire buckles and the HC2 dispenser cart.

What the ITI 71 cord strapping kit solves on site
Heavy loads that shift in transit cause damage, safety incidents and claims. Narrow strap or low tension cannot hold steel bundles, timber packs or heavy pallets in place. Pneumatic tensioners need a compressor nearby. Manual tools are slow and inconsistent across operators. Feeding a heavy coil of wide strap from the ground wastes time and creates trip hazards.
How the ITI 71 tensioner works
The ITI 71 tensions cord strap from 16 to 40 mm wide and 0.5 to 2.5 mm thick. Maximum tension force is 11 000 N. Tensioning speed reaches 6.5 m/min. The operator feeds the strap around the load, places a wire buckle, inserts both ends into the tool and pulls the trigger. The tool tensions and locks the strap; the operator then crimps the buckle.
The tool weighs 5 kg. Two 18 V / 5 Ah batteries are included. The HC2 dispenser cart holds coils on 200 mm cores, feeding the strap without tangling. The cart includes a tool holder and moves across the floor on wheels.
Where this ITI 71 cord strapping kit fits and where it does not
The kit is made for steel, timber, heavy pallets and industrial goods that need high tension with cord strap. Applications include steel mills, sawmills, building-materials yards and heavy manufacturing.
Limits to note: the ITI 71 tensions only. It does not seal. A separate crimping tool or manual buckle crimper is needed. The tool does not accept PET, PP or steel strap.
What to check before you order your ITI 71 cord strapping kit
Three variants are available, each with a different cord strap coil:
- 19 mm cord strap
- 25 mm cord strap
- 32 mm cord strap
Each variant ships with the ITI 71 tensioner, two batteries, a charger, one strap coil, wire buckles and the HC2 dispenser cart. If you need additional coils or a different width within the 16–40 mm range, contact us before ordering.





