The SIAT VIPER strapping tool is a battery-driven handheld unit for tensioning, sealing and cutting PP and PET strap in widths of 9, 12 or 16 mm. If you oversee a packing line or despatch area, uneven strap tension wastes your time: shifted loads, goods damaged in transit, and rework that slows throughput.
Why a SIAT VIPER strapping tool transforms your packing line
Applying strap by hand or with a pneumatic device brings several drawbacks:
- Tension differs from one operator to the next, leaving straps too loose or too tight.
- Switching strap width means swapping tools or fittings, adding minutes to every changeover.
- Air hoses restrict movement around the pallet and demand compressor infrastructure.
- Fatigue across a shift reduces joint quality towards the end of the day.
Each of these problems leads directly to rejected consignments, wasted material and additional labour spent re-strapping loads.

How the SIAT VIPER strapping tool operates
The SIAT VIPER accepts PP and PET strap from 0.5 to 1.1 mm thick. It offers automatic, semi-automatic and manual modes. Up to eight programmable settings can be stored for different strap and load combinations. In automatic mode, tensioning, friction-welding and cutting take place in a single step.
These settings allow you to match the strapping tool to each load and strap pairing. Standard tension ranges from 1,200 to 2,700 N. The soft setting delivers 500 to 1,500 N for fragile goods. Maximum tensioning speed reaches 200 mm/s, and friction-weld joints achieve 75–85 % sealing efficiency.
A brushless motor drives the mechanism. The tool runs on a Makita Li-Ion 18 V battery: the 3.0 Ah pack provides 250–350 cycles per charge, whilst the optional 5.0 Ah pack provides 400–550 cycles. Charging takes roughly 20 minutes.

Where the SIAT VIPER strapping tool fits your operation
This device is made for industrial packaging and logistics operations that use PP or PET strap. It works in temperatures from −5 °C to 40 °C. At 3.9 kg with battery and measuring 369 × 165 × 123 mm, the strapping tool is fully portable, free from hoses and cables.
It is not intended for steel strap. If your strap falls outside the 9–16 mm width or 0.5–1.1 mm thickness range, select a different model. Noise during welding is approximately 96 dB(A); hearing protection may be required.

What to check before ordering your SIAT VIPER strapping tool
- Strap material and size: PP or PET, 9–16 mm wide, 0.5–1.1 mm thick.
- Battery: Makita 18 V, 3.0 Ah included; 5.0 Ah available as an option.
- Charger voltage: 230 V or 115 V.
- Operating modes: automatic, semi-automatic, manual.
- Accessories: foot guard, suspension hook and spring for thin PP are available separately.
The spec table on this page lists every dimension and rating. Confirm your strap type and width before placing your order.









