JET PET strapping kit: begin strapping pallets without sourcing parts individually
The JET PET strapping kit built around the JET 12–16 mm battery strapping tool delivers every component in a single purchase: tool, battery, charger, PET strap and dispenser cart. Whether you are fitting out a new packing station, moving away from a pneumatic line or kitting a second shift, buying each item on its own means matching strap widths to the tool, confirming battery chemistry and waiting on separate deliveries. This kit takes that task off your hands.

What slows pallet strapping down without the right setup
Hand tensioners demand physical effort on every strap cycle, which reduces throughput and fatigues operators across a full shift. Pneumatic tools tie you to a compressor and hose run, limiting where you can strap. Even when you already own a battery tool, a missing charger or incompatible strap width halts work until the correct part turns up.
- Hand tensioning is slow and physically demanding over hundreds of cycles.
- Air-powered tools confine movement to the length of the hose.
- Mismatched strap dimensions cause jams or weak joints.
- Separate orders risk delays when one component is out of stock.
How this JET PET strapping kit solves it
The JET strapping tool accepts PET and PP strap. It runs on a 14.4 V lithium-ion battery rated at 3000 mAh with a 10C discharge rate, so there is no cord or hose to manage. The kit ships with a charger matched to that battery. A 12 mm × 0.6 mm PET strap coil is included, ready to load onto the dispenser cart that comes in the same package.
Because the tool is cordless, you can take it wherever a pallet needs strapping without trailing a cable or hose. The dispenser cart holds PP or PET strap coils and provides smooth strap feeding to the tool.
Where this JET PET strapping kit fits and where it does not
This kit suits operations that strap pallets with PET or PP band. It is a practical choice when you need a ready-to-use package for a single operator or a new workstation.
- Designed for PET and PP plastic strap only; not for steel strap.
- The included strap is 12 mm × 0.6 mm PET; if you need a different width or PP strap, order that separately.
If your application calls for steel banding or strap wider than 16 mm, you will need a different tool.
What to check before you order this JET PET strapping kit
Confirm that PET or PP strap suits your load. The coil included is 12 mm PET at 0.6 mm thickness. When that coil runs out, the cart takes PP or PET strap.
- Included: JET 12–16 mm strapping tool, 14.4 V lithium-ion battery, charger, 12 mm × 0.6 mm PET strap, dispenser cart.
- Battery chemistry: lithium-ion, 3000 mAh, 10C discharge.
- No steel strap, no seals and no spare batteries included.




