The TES Plus strapping kit gives you a ready-to-go packing station: a battery strapping tool, two Li-ion batteries, a charger, one coil of PET polyester strap (choose 15.5 mm or 19 mm at checkout) and a PP/PET dispenser cart. If you are fitting out a new packing line, swapping out a worn tool or equipping a second shift, ordering every component one by one costs time and risks incompatible parts. This kit removes that problem.
What the TES Plus strapping kit solves on the packing floor
Loose pallets lead to damaged goods, rejected shipments and claims. Manual tensioning is slow and uneven: one operator pulls harder than the next, and strap tension varies from load to load. Without a matched cart, coils sit on the floor, unwind and collect dirt. A missing second battery means the tool sits idle while the single pack charges. This kit addresses each of those issues in one purchase.

How the TES Plus strapping kit works
The TES Plus tool accepts PET and PP strap from 16 to 19 mm wide and 0.5 to 1.2 mm thick. It closes the strap with a friction weld, so you do not need metal seals or buckles. Key figures:
- Tool dimensions: 345 × 110 × 155 mm
- Tool weight: 4.3 kg
- Charging time: 90 minutes per battery
Two batteries are supplied, so one can charge while the other is in use. You set the strap tension to match the load.
Where this TES Plus kit fits and where it does not
The tool is used across paper, aluminium, textile, steel, logistics, farm, chemical and metal industries. It suits PET and PP plastic strap only; it is not built for steel strap. The included PET coil has a 406 mm core. When ordering, pick the variant that matches your application:
- 15.5 × 0.7 mm / 1 750 m coil
- 19 × 1.0 mm / 1 000 m coil
If your loads call for strap narrower than 16 mm or wider than 19 mm, a different tool is required.
What to check before you order this TES Plus strapping kit
Confirm the strap width and thickness your application demands. The two variants cover most medium-heavy to heavy pallet strapping needs in PET. The set includes:
- TES Plus battery strapping tool (16–19 mm)
- Two Li-ion batteries and one charger (110–240 V, 50–60 Hz)
- One coil of PET strap (15.5 mm or 19 mm, core 406 mm)
- One dispenser cart for PP/PET strap (65 × 48 × 110 cm, approx. 28 kg)
The cart accepts strap with a 400 mm inner diameter.
Specifications
| Parameter | Specification |
|---|---|
| Size | 65×48×110cm, |








