The A4 sealless strapping tool closes steel strap joints without metal seals. Instead of crimping a separate seal around two strap ends, the tool punches the overlapping layers together to lock them in place. If you band heavy loads with steel strap and want to stop carrying boxes of seals, this tool removes that consumable from your packing line.
Seal waste and supply gaps: what the A4 sealless strapping tool addresses
Steel strapping with conventional seals means stocking the right seal size for every strap width and gauge you use. Running out of seals mid-shift stops work. Each seal also adds cost per joint, and used seals become sharp offcuts that need clearing from the work area.
If you strap outdoors or on a building site, carrying a box of seals alongside a coil of steel strap and a tensioner is one more thing to manage. A missed or dropped seal is easy to overlook and difficult to find on a busy floor.

How the A4 forms a joint without seals
After you tension the steel strap around the load, position the overlapping ends in the tool’s jaw and squeeze the handles. The A4 sealless strapping tool drives a punch through both strap layers, deforming the metal so the layers interlock. Joint strength reaches 80–85 % of the strap’s own breaking force—enough for most heavy-duty banding applications. It then cuts the strap automatically.
The tool accepts steel strap from 25 to 32 mm wide and 0.55 to 0.75 mm thick. Tensioning force reaches approximately 8000 N. Operation is entirely manual: no battery, no air supply, no mains connection. The tool measures 40 × 10 × 33 cm and weighs 4.2 kg.

Where the A4 sealless strapping tool fits and where it does not
This tool suits steel strapping tasks where seal-free joints are an advantage: outdoor sites, mobile teams, packaging lines that use a single strap width in the 25–32 mm range, and any setting where reducing consumables matters.
Limitations to bear in mind:
- Steel strap only—not for PP or PET plastic strap.
- Width range is 25 to 32 mm; narrower or wider steel strap will not seat in the jaw.
- Thickness must be between 0.55 and 0.75 mm.
- Joint strength is 80–85 % of the strap’s rated breaking force, not 100 %. For applications that require full-strength joints, a sealed connection may be needed.
- Tensioning is done separately; this tool seals and cuts.

What you receive with the A4
The A4 sealless strapping tool ships ready to use with no additional parts or consumables needed. Package contents:
- A4 sealless strapping tool (40 × 10 × 33 cm, 4.2 kg)
- Packed dimensions: 54 × 16 × 23.5 cm, shipping weight 5 kg
Because the tool forms each joint by punching the strap layers together, there are no seals to order, stock or dispose of.









