The GT-ONE PP strapping kit contains every part you need to begin friction-weld strapping straight from the box. If you are piecing together your strapping setup item by item, matching compatible strap widths, ordering batteries on their own, or working without a proper dispenser, this kit takes that burden off your hands in a single purchase.
What goes wrong without a matched GT-ONE PP strapping kit
Loose or shifting loads in transit often stem from inconsistent tensioning or the wrong strap-and-tool pairing. Typical problems include:
- Operators lose time feeding strap from a coil left on the floor, causing tangles and kinks.
- Tools that depend on air hoses limit movement around the pallet and slow each cycle.
- Buying tool, strap and cart from different suppliers risks incompatible widths or core diameters.
Every minute lost per strap cycle adds up across a shift. Goods damaged by under-tensioned bands cost more than the strap itself.

How the GT-ONE PP strapping kit works
The GT-ONE accepts PP and PET strap from 10 to 16 mm wide and 0.5 to 1.1 mm thick. It closes the strap by vibration welding, forming a friction-weld joint with no metal seals or buckles. Tension is adjustable up to 2750 N in standard mode or as low as 500 N in soft mode, so you can match the force to the load.
- Single-button operation in automatic mode: one press tensions, seals and cuts.
- Bosch brushless motor drives the tensioning and welding cycle.
- Digital display shows tension and operating parameters at a glance.
- Tool weighs 3.7 kg with battery fitted and measures 320 × 100 × 160 mm, suitable for horizontal and vertical strapping.
The supplied 14.4 V, 4.0 Ah Li-Ion battery charges in 30 minutes. The dispenser cart (65 × 48 × 110 cm, 400 mm inner diameter) holds PP or PET coils and rolls alongside the pallet.

Where this PP strapping kit fits and where it does not
The GT-ONE PP strapping kit suits warehouses and production lines that band boxes, cartons or pallets with PP strap. It operates in vertical or horizontal positions, making overhead or side strapping straightforward. The modes available—automatic, semi-automatic, manual and soft—cover a range of application needs.
If your loads call for steel strap or widths above 16 mm, this tool is not suitable. Equally, if you already own a GT-ONE and only require strap refills or a spare battery, ordering the full kit is unnecessary.

What to check before you order the GT-ONE PP strapping kit
Two strap variants are offered when you select this kit:
- 12 × 0.8 mm PP strap on a 2000 m coil
- 15.5 mm PP strap on a 2000 m coil
Choose the width that matches your load requirements.
The kit includes the GT-ONE strapping tool, one Li-Ion battery, a charger (220 V), one PP strap coil in the chosen width, and one dispenser cart. No metal seals are needed because the tool welds the strap by friction.






