The GT-ONE PET strapping kit brings together a battery-powered strapping tool, PET strap, a 14.4 V / 4.0 Ah Li-Ion battery, a 220 V charger and a dispenser cart in a single consignment. The GT-ONE tool accepts PET and PP strap from 10 to 16 mm wide and is built around a Bosch brushless motor. It weighs 3.7 kg and measures 320 × 100 × 160 mm, with a maximum tension of 2750 N on PET and 500 N on PP.
What makes the GT-ONE PET strapping kit stand apart
The GT-ONE tool uses a Bosch brushless motor that does not require carbon-brush replacement. It offers four operating modes selectable through a digital display, so the operator can match tension and sealing to the load without switching tools. The battery charges in approximately 30 minutes and delivers 200 to 400 strapping cycles per charge, depending on strap type and tension.
Because the tool runs on a 14.4 V lithium battery, there is no need for compressed-air lines or mains sockets at the strapping station. The dispenser cart (110 × 65 × 48 cm, 400 mm inner coil diameter) keeps the strap coil accessible and mobile.

Kit contents and strap options
This GT-ONE PET strapping kit is available in two strap variants:
- Variant A: PET strap 12 mm × 0.6 mm, coil length 2000 m.
- Variant B: PET strap 15.5 mm × 0.7 mm, coil length 1750 m.
Both variants include the GT-ONE 10–16 mm strapping tool, one 14.4 V / 4.0 Ah Li-Ion battery, a 220 V charger and a dispenser cart. Select the variant that matches your strap specification.

Where this GT-ONE PET strapping kit fits
The kit is intended for pallet strapping and industrial packaging tasks where PET or PP strap in the 10–16 mm range is required. With 2750 N maximum tension on PET, the GT-ONE handles heavy and unstable loads that demand high holding force. The 500 N limit on PP suits lighter pallets and bundling tasks.
If your operation requires strap wider than 16 mm or fully automated strapping, a different solution is needed. Confirm that this GT-ONE PET strapping kit matches your strap specification before placing an order.

Specifications at a glance
- Strap compatibility: PET and PP, 10–16 mm wide.
- Maximum tension: 2750 N (PET), 500 N (PP).
- Battery: 14.4 V / 4.0 Ah Li-Ion, approximately 30-minute charge, 200–400 cycles per charge.
- Motor: Bosch brushless.
- Tool weight: 3.7 kg.
- Tool dimensions: 320 × 100 × 160 mm.
- Charger: 220 V.
- Operating modes: 4, selectable via digital display.
- Dispenser cart: 110 × 65 × 48 cm, 400 mm inner coil diameter.






