Pallet strapping needle B190cm: thread strap beneath pallets without bending down
The pallet strapping needle B190cm is a hand-held tool that holds plastic strap in a clip head and steers it under a pallet base along a flexible rod. If your operators currently feed strap beneath pallets by hand, they spend time kneeling, freeing snagged strap and repositioning themselves around each load. This pallet strapping needle replaces that routine with one standing movement.

Why threading strap under pallets wastes time and causes strain
Feeding strap beneath a loaded pallet by hand forces the operator to bend or kneel for every loop. Over a shift with dozens of pallets, this accumulates into considerable physical strain on the back and knees. Without a pallet strapping needle, strap frequently catches on pallet boards or curls away from the intended path, compelling the operator to re-feed it. Each delay cuts the number of pallets strapped per hour, and uneven strap placement can leave loads poorly secured during transit.

How the pallet strapping needle works and what it changes
The B190cm comprises a 190 cm fibre rod and a curved polyurethane clip head measuring 12.8 cm × 4.3 cm × 6.8 cm. You clip the strap end into the head, slide the rod under the pallet and pull the strap through from the far side. The curved head profile passes over pallet rails without snagging, so the strap arrives at the opposite side without jamming.
- Rod length: 190 cm, made from highly flexible fibre
- Clip head material: durable polyurethane
- Compatible strap: PP, PET and other types, up to 25 mm wide and 1.5 mm thick
- Net weight: 185 g, gross weight: 570 g
At 185 g net, the tool adds almost no fatigue even across a full shift. No battery, air supply or cable is needed. The operator remains on their feet throughout, which cuts repetitive bending and the injury risk that accompanies it.

Where the pallet strapping needle fits and where it does not
This tool suits manual strapping in warehouses, production floors and logistics centres where pallets are secured with PP, PET or other plastic strap.
- Accepts PP, PET and other strap types
- Strap must not exceed 25 mm width or 1.5 mm thickness
- Rod length: 190 cm
- Fully manual, no power source needed

What to check before you order this pallet strapping needle
Confirm that your strap does not exceed 25 mm width and 1.5 mm thickness. The rod is 190 cm long. No power source is required: this is a fully manual tool.
- Overall dimensions: 190 cm × 4.3 cm × 6.8 cm (L × H × W)
- Rod material: highly flexible fibre
- Clip material: polyurethane
- Carton size: 75 cm × 41 cm × 5.5 cm










