The manual composite strap tensioner XW-20 is a hand-operated tool built for polyester fibre and flexible (composite/corded) strap in widths from 13 mm to 50 mm. If your packing stations sit away from compressed air lines, or your loads travel between buildings and yards where no mains socket is available, a manual tensioner allows you to strap wherever the work takes you.
What happens without a manual composite strap tensioner
Textile and composite straps must be pulled taut before the joint is made. When operators attempt to tension by hand or use a tool that fails to grip the strap properly, loads shift during transport. Damaged goods, re-strapping at the dock and time spent chasing loose bundles add up across a shift. A dedicated manual composite strap tensioner delivers substantial tightening force, so the strap grips the load firmly and stays in place during handling and transit.

How this manual composite strap tensioner works
The XW-20 uses a special structure design to grip the strap and apply tightening force directly, making packaging straightforward. Because the body and components are manufactured from high-strength alloy materials, the tool withstands heavy loads such as steel, aluminium ingots and heavy packaging.
- Suitable strap types: polyester fibre straps and flexible (composite/corded) straps
- Three width variants: 13–19 mm, 19–25 mm and 25–50 mm
- Weight: 1.12 kg (13–19 mm), 1.18 kg (19–25 mm), 1.76 kg (25–50 mm)
- No battery, no air hose, no cable
Even the widest variant weighs only 1.76 kg, making it straightforward to carry between stations. The patented design keeps operator fatigue low during repeated use.

Where this strap tensioner fits and where it does not
The XW-20 is employed in industries including paper, aluminium, steel, wood and wooden packaging, chemical fibre, cotton, tobacco, chemicals and metal products. It handles irregularly shaped items as well as standard pallets. Manual tensioning gives precise control over how tight each strap sits, which matters when loads vary in size and weight.
This tool is not compatible with plastic (PP/PET) or steel strap. If you need to tension those materials, choose a tensioner designed for that strap type.
What to check before you order a composite strap tensioner
- Strap width: measure the textile or composite strap you use. Pick the 13–19 mm, 19–25 mm or 25–50 mm variant accordingly.
- Strap material: confirm you are using polyester fibre or flexible/composite corded strap. This tool will not work on plastic or metal strap.
- Quantity of tools: if several operators strap at the same time, each one needs a tensioner at the matching width.





