AIR Metal strapping tool combines tensioning and sealing of 19 mm steel strap in a single pneumatic device. On a busy packing line, switching between a separate tensioner and sealer for every joint costs time and introduces variation. This tool does both in one trigger pull: it grips the strap, tensions it to the set force and forms a push-type mechanical seal.
Why the AIR Metal strapping tool saves time on every joint
With separate hand tools, the operator tensions the strap, puts the tensioner down, picks up the sealer and crimps. Each joint needs two tool changes, two positioning steps and two trigger actions. The AIR Metal strapping tool does all of it in one cycle. Over a full shift, that removes the tool changes from every joint and shortens packing time.
Because tension is applied pneumatically, every joint gets the same force regardless of operator fatigue. Manual tensioners rely on grip strength; by the end of a shift, joints tend to loosen. Consistent tension means consistent load security.

How the AIR Metal strapping tool works with 19 mm steel strap
Connect the tool to a standard compressed air supply. Wrap 19 mm steel strap around the load, overlap the ends and place the tool over the joint. One trigger pull runs through these stages:
- Pneumatic gripper locks onto the strap
- Tensioning cylinder pulls the free end to the preset force
- Push-type sealer presses the overlapping layers into a mechanical lock
- Tool releases the finished joint
No separate metal seal clips are consumed. The push-type joint deforms the two strap layers into each other, forming a lock that resists vibration and handling shock during transport and storage.

Where the AIR Metal strapping tool fits and where it does not
This tool is built for 19 mm steel strapping on medium to heavy loads. Common applications:
- Palletised goods in warehouses and distribution centres
- Bundled steel tubes, bars and profiles
- Machinery parts and fabricated metalwork for dispatch
It requires compressed air at the strapping station. It does not accept polyester or polypropylene strap and is not compatible with steel strap widths other than 19 mm. If compressed air is unavailable, a battery-powered strapping tool covers the same strap width without a supply line.

What to verify before ordering the AIR Metal strapping tool
Check the following before you order:
- Your steel strap width is 19 mm
- Compressed air is available at every strapping station
- Your loads suit steel strapping (weight, handling, transport conditions)
- You do not need to strap with polyester or polypropylene
The tool is delivered without strap. You need a supply of 19 mm steel strapping and compressed air. No seal clips are required.
Specifications
| Parameter | Specification |
|---|---|
| Apply straps | Steel strip |
| Air pressure | 0.35-0.6Mpa |
| Straps specification | (19-32)×(0.8-1.2) mm |
| Steel strip tension speed | 5.3 m/min |
| Tension force | ≥9.8 KN/0.6Mpa |
| Machine weight | 15 kg |
Technical datasheet
Free download, no account needed.






