The AIR19 strapping tool is a compressed-air-powered handheld device built to tension, seal and cut PET and PP strap in a single operation. If you run a packaging line or dispatch bay, you will know that every loose strap or failed seal can lead to a claim, repackaging work or a delayed shipment. This tool tackles those risks with pneumatic force and a friction weld seal that removes the need for metal clips.
What poor strapping costs you: the case for the AIR19 strapping tool
Loose loads damage goods in transit. Uneven tension allows products to shift on pallets, resulting in crushed cartons, scuffed surfaces and rejected consignments. When operators hand-tighten straps and crimp separate metal seals, each bundle takes longer to complete, and the quality of every joint depends on the individual.
Metal seals also bring a recurring consumable cost. Every strap requires its own clip, and those clips can indent or mark the packaged goods beneath them. On high-volume lines, the accumulated time spent positioning and crimping seals across a full shift is a measurable drain on productivity. Switching from clip-based sealing to a friction weld joint addresses both the cost and the speed issue.

How the AIR19 strapping tool works: pneumatic tension and friction weld sealing
This tool connects to a compressed air line at 0.5–0.8 MPa. It applies tension of up to 3500 N, then forms a high-grade friction weld seal through vibration welding. The weld bonds the overlapping strap layers without any separate fastener.
- Strap tension is set by turning a dial on the tool body, letting you match the force to each load.
- Welding time is adjustable between 2 and 5 seconds, so you can adapt the seal strength to different strap grades.
- A single thumb press starts the complete cycle: tensioning, sealing and cutting in one motion.
- At 3.82 kg and 280 × 160 × 180 mm, the AIR19 strapping tool is compact enough for prolonged use in both vertical and horizontal orientations.

Where the AIR19 suits your operation and where it does not
This air-driven tool is built for PET and PP strap only, in widths from 13 to 19 mm and thicknesses from 0.5 to 1.2 mm. It suits warehouse and production environments where a compressed air supply is readily available. If you already have an airline running to your packing area, the tool slots in with no additional power source.
- Suited to pallet strapping, bundling and general packaging tasks.
- Operates in vertical and horizontal strapping positions.
- Not intended for steel strap or for widths outside 13–19 mm.
If your strap falls outside those dimensions or you work with steel, you will need a tool rated for that material and size.

Before you order this AIR19 strapping tool: specifications to confirm
Prior to placing your order, confirm that your strap and air supply match the tool:
- Strap material: PET or PP.
- Strap width: 13–19 mm.
- Strap thickness: 0.5–1.2 mm.
- Air supply: 0.5–0.8 MPa.
The AIR19 is powered entirely by compressed air. No battery or mains electricity is required. Check that your existing air infrastructure delivers the necessary pressure at the point of use. As long as your compressor maintains 0.5–0.8 MPa at the outlet, the tool is ready to operate.





