Baling strap in 16 mm hot-melt corded textile is supplied here as a four-roll package, each roll holding 340 m of material. If you run a vertical baler for cardboard, you need something to hold the compressed bale once the chamber opens. Without a proper tie, bales expand, lose shape and create extra handling.
What happens without a dedicated baling strap
A bale that is not secured straight after compression springs back and loses density. Re-compressing or re-tying adds time to every baling cycle. Loose material spreads across the work area and blocks the next loading cycle. Improvised cord or wire that does not match the baler width gives uneven tension and lets bales shift during storage or transport. A purpose-made baling strap removes these problems by fitting the baler and the bale size.

How this baling strap holds your bales
The strap is a hot-melt corded textile measuring 0.56–0.60 mm thick. Its linear breaking strength reaches up to 550 kg, with a system breaking strength of up to 850 kg. You tie it by hand directly at the baler, with no tools, buckles or seals required.
The tying sequence follows the baler’s own cycle:
- Feed the strap through the vertical baler chamber before loading waste.
- Compress the waste to form a bale.
- Tie the strap around the finished bale by hand and tighten the knot.
- Remove the bale and repeat.
Each roll weighs 2.7 kg, so carrying it and mounting it on a holder takes little effort. The four-roll package provides 4 × 340 m of baling strap.
Where baling straps fit and where they do not
This strap is intended for operations that tie bales by hand at cardboard balers accepting 16 mm wide strapping. It covers household, commercial and industrial waste management.
It is not suited to:
- Applications requiring metal or plastic strapping.
- Machine-tensioned bands or seal-based joints.
- Strap widths other than 16 mm.
If your baler or load requires a different material or an automatic tensioning cycle, choose another product.
What to verify before ordering this baling strap
- Width: 16 mm. Check that your baler or dispenser accepts this size.
- Roll dimensions: 180 mm outer diameter. Measure the space on your holder.
- Package: 4 rolls × 340 m.
- Material: hot-melt corded textile, 0.56–0.60 mm thick, tied by hand without seals or buckles.
- Coil weight: 2.7 kg per roll.


