The AKU-STEEL DUO steel strapping kit brings a battery tensioner, a battery sealer, a steel strap coil, seals and a dispenser cart together so you can start strapping heavy loads on the day the shipment arrives. Steel strapping on pipes, profiles and timber is hard to set up piece by piece: tool, strap, seals and a way to move the coil all need to match.
What this AKU-STEEL DUO steel strapping kit contains
The kit ships with the AKU-STEEL tensioner, the AKU-STEEL sealer, one 25 kg coil of steel strap, a box of push-type seals, two 18 V Li-ion batteries (one per tool), two chargers and an HS5 dispenser cart for ribbon-wound coils up to 50 kg.

How the AKU-STEEL DUO tools work together
The tensioner pulls the steel strap tight around the load. Tension force reaches up to 6 kN. Once tensioned, the sealer crimps the seal onto the overlapping strap layers with a force of up to 16.8 kN. Both tools run on 18 V Li-ion batteries and are operated by one person.
The HS5 cart holds the strap coil, feeds it to the work area and gives the operator a place to keep both tools between straps. Cart weight is 15 kg.
Where this AKU-STEEL DUO steel strapping kit fits
The kit suits sites that strap steel pipes, metal profiles, timber and other heavy goods with steel strap from 19 to 32 mm wide. Because both tools are battery powered, no compressed air or mains supply is needed at the strapping point.
Limits to note: the kit uses push-type seals, so you need seals as a consumable. The tools do not handle plastic or composite strap.
What to check before you order the AKU-STEEL DUO steel strapping kit
Three variants are available, each with a different strap width:
- 19 mm steel strap, 25 kg coil
- 25 mm steel strap, 25 kg coil
- 32 mm steel strap, 25 kg coil
Each variant includes the tensioner, sealer, two batteries, two chargers, one coil of steel strap, a box of matching seals and the HS5 dispenser cart. If you need additional coils or seals, contact us before ordering.





