The battery for NEO2 strapping tool is an 18 V, 5.0 Ah Li-ion cell pack built for the NEO2 9–16 mm battery strapping tool. If your warehouse or production floor depends on battery-powered strapping, a flat pack during a busy run brings work to a standstill. Operators stand idle while the single included cell sits in the charger, and pallets queue up awaiting securing.
What happens without a battery for your NEO2 strapping tool
Battery strapping tools draw current during every tensioning and sealing cycle. Across a full shift or a large batch of pallets, the tool’s single cell can run flat before the job is finished. The consequences are straightforward:
- Strapping halts while the battery recharges
- Pallets accumulate at the wrapping or dispatch area
- Dispatch schedules slip and downstream loading is delayed
- The operator has no productive task during the wait
The NEO2 tool is shipped with one battery and one charger. There is no way around the recharge pause unless you have a second pack ready to go.

How a spare battery for the NEO2 strapping tool removes charging downtime
With two batteries in rotation, you remove the flat pack from the tool and insert the charged one. The discharged pack goes on the charger while strapping carries on uninterrupted. This cell is rated at 18 V and 5.0 Ah, identical to the battery included with the NEO2. It seats in the tool the same way and delivers the same voltage and capacity.
Keeping a charged spare within reach of the strapping station is the simplest way to prevent a gap in your packing line caused by a flat cell.
Where the NEO2 battery fits
This battery is made for the NEO2 9–16 mm battery strapping tool. Before ordering, confirm the model name printed on your tool. Other battery strapping tools use other batteries; the spare battery for each tool is listed on its own product page.
What to check before you order a battery for the NEO2 strapping tool
Review these points before placing your order:
- Tool: your strapping tool must be the NEO2 9–16 mm model.
- Charger: no charger is included with this battery. Charge it using the charger supplied with your NEO2 tool.
- Scope of delivery: you receive one Li-ion battery (18 V, 5.0 Ah). The tool, charger and strapping material are not part of this listing.
- Safety: charge only with the recommended charger. Avoid extreme temperatures and do not disassemble the pack.




